BJJMN - DP40 DYE PENETRANT
- MSDS: BJJMN
- Manufacturer: SHERWIN INC
- Product Name: DP40 DYE PENETRANT
- National Stock Number: 6850-01-266-4554
Product Identification
Product ID:DP40 DYE PENETRANT
MSDS Date:01/01/1986
FSC:6850
NIIN:01-266-4554
MSDS Number: BJJMN
Responsible Party
SOUTH GATE, CA 90280-7402
US
Emergency Phone: 213-861-6324
Info Phone: 213-861-6324
Cage: 21405
Contractor
Telephone: 562-861-6324/FAX 923-8370
Cage: 21405
Ingredients
MIXTURE ALIPHATIC OILS REFINED
Fraction By Weight: 50-70%
AROMATIC HYDROCARBON
CAS: 68333-88-0
Fraction By Weight: 10-30%
DYESTUFF
Fraction By Weight: 2-8%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Explanation of Carcinogenicity:NONE NOTED
Effects of Overexposure:INHALATION:OVEREXPOSURE CAUSES RESPIRATORY
TRACT IRRITATION, CNS STIMULATION, FOLLOWED BY DEPRESSION.
First Aid
First Aid:EYE:IMMEDIATELY FLUSH WITH WATER AT LEAST FOR 15 MINUTES.SEE
A PHYSICIAN.SKIN:WASH WITH SOAP AND WATER.INHALATION:MOVE TO FRESH
AIR.GIVE CPR/OXYGEN IF NEEDED.GET MEDICAL ATTENTION.INGESTION:DO
NOT IND UCE VOMITING.CALL A PHYSICIAN.IF VOMITING OCCURS
SPONTANEOUSLY, KEEP HEAD BELOW HIPS.
Fire Fighting
Flash Point Method:CC
Flash Point:160F,71C
Lower Limits:0.9
Upper Limits:7.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL,FOAM.
Fire Fighting Procedures:DO NOT USE DIRECT STREAM OF WATER.IT SPREADS
THE FIRE.PRODUCT MAY FLOAT & REIGNITE. FIRE FIGHTERS SHOULD WEAR
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ON BURNING, THIS PRODUCT CAN RELEASE
TOXIC FUMES AND VAPORS.
Accidental Release
Spill Release Procedures:EXTINGUISH ALL FLAMES.TAKE UP WITH AN
ABSORBENT MATERIAL.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:STORE AWAY FROM HIGH TEMPERATURES AND
OPEN FLAMES. KEEP CONTAINERS CLOSED.EMPTIED CONTAINER RETAINS VAPOR
& RESIDUES.DO NOT CUT OR WELD.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID CONTACT WITH EYES AND
SKIN. WASH THOROUGHLY AFTER HANDLING. FOR INDUSTRIAL USE ONLY. DO
NOT EAT OR SMOKE WHILE WORKING WITH THIS COMPOUND.
Exposure Controls
Respiratory Protection:USE NIOSH-APPROVED RESPIRATOR IF VAPORS OR MISTS
ARE GENERATED.
Ventilation:LOCAL EXHAUST IS RECOMMENDED.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GOGGLES WITH OPTIONAL FACE SHIELD
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER.
INDUSTRIAL-TYPE WORK CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
SET CONSISTS OF ONE 5 GALLON CAN OF DP40 DYE PENETRANT, AND ONE 5
GALLON CAN OF ER85 EMULSIFIER. DO NOT GET ON
SKIN OR IN EYES. WASH BEFORE EATING. DO NOT SMOKE.
Chemical Properties
HCC:V4
Boiling Pt:B.P. Text:350F,177C
Vapor Pres:1.0
Vapor Density:>1
Spec Gravity:0.90
Evaporation Rate & Reference:0.1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED LIQUID, WITH PETROLEUM ODOR
Percent Volatiles by Volume:40
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURE AND OPEN FLAME.
Hazardous Decomposition Products:CARBON MONOXIDE, AND OTHER
UNIDENTIFIED ORGANIC COMPOUNDS MAY BE FOUND UPON COMBUSTION.
Disposal
Waste Disposal Methods:TAKE UP WITH AN ABSORBENT MATERIAL AND DISPOSE
OF IN COMPLIANCE WITH ALL LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.